Qwik Kut MV-250 – PressureEquipment

Qwik Kut MV-250

  • $20.00 USD

This is an aggressive compound used to remove 1,000 – 1,200 grit sanding scratches. MV-250 uses a high tech blend of abrasives that cut then quickly break down and polish to a high gloss finish. Works with either a foam or wool pad. This product uses an Aluminum Oxide abrasive, which is safer than the silica abrasive used in the MV-90. This abrasive also breaks down faster and provides a better polish than the silica abrasive in the MV-90. The benefit is a swirl-free finish. This is a great first step compound for Body Shops and competes well against other aluminum oxide containing compounds.
MV-250 will not stain or stick to paint. Splatter easily cleans up with a damp towel or by rinsing the vehicle with water.
    • Cleans using both abrasive and chemical cleaners.

    • Neutral pH. Will not "track" or stain paint.

    • Body Shop Safe. Does not contain silicone or wax.

    • Abrasive breaks down into a flat polishing mode resulting in a smoother less swirled finish.

    • Less dust and easier clean up then competing products.

  • Will not load up pad when used as recommended (sparingly).

Special Tips and Precautions:
    • As with all compounds, be sure the painted surfaces are cool to the touch before applying product.

    • This product should only be used with a high-speed polisher.

    • Because the heat and friction of the buffer generate the “flattening” process, pad types and buffer speed will change the amount of time it takes to get to a glossy finish.

    • It is important to continue to buff in small sections and to work the product through its full cycle.

  • Stopping prematurely will leave the surface scuffed or swirled.



Sold Out